P50 Drop in replacement - no neutral dimmer
- Download PDF File with more information 
The elegant P50 features hand-finished switch plates of robust 2mm thick solid metal, available in the following finishes:
Stainless Steel Polished – hand-polished to a high lustre
Stainless Steel Brushed – matte finish resists marking
White Metal – powder-coated brass with engraved logo |
| |
|
P50
The stylish Futronix P50 is the perfect dimmer to easily replace an existing light switch, as it requires no neutral. And dimming your lights saves energy!
|
The smallest all-digital dimmer available, the P50 gives three programmable levels of dimming, ideal for bedroom, kitchen and living areas. Create and set the looks you prefer for your room, then recall them effortlessly at any time with a touch of the remote control.
Futronix stylish face plates are superbly finished to match any d้cor. The Futronix P50 dimmer features 3 levels of brightness. Once programmed, your settings will be remembered – even with the power switched off.
In use - with just a single touch – the lighting will fade to your selected level. Press OFF and lights will gently fade out. Read or watch television or a movie before sleep, or put children to bed with the built-in Sleep Delay feature – ideal for both adult’s and children's |
 |
| bedrooms. |
| |
|
Energy Savings
Dimming lighting saves energy. Bulb life is also prolonged by 30% because fading a lamp is gentler on the filament than just switching it on or off. |
| |
|
% Lights Dimmed |
% Energy Saved |
Extends Lamplife |
10% |
10% |
22X |
25% |
20% |
>24X |
50% |
40% |
>20X |
75% |
60% |
>20X |
|
| |
|
|
Remote Control
Your choice of dimming levels can be selected with the supplied remote control. Programme your dimming levels, master raise and lower, fade rate and sleep timer duration – all from the convenient remote control. You can choose power up dimming options, either the last dimming level selected, or OFF.
Simple to Program
Changing levels from factory settings is simple. Press OFF &
Level 1 simultaneously for 5 seconds, then select the level to be adjusted, holding the key to increase the brightness level or pressing OFF to lower the level to your satisfaction. Release the key and your level is automatically stored for recall.
Technical
The P50 is a single channel dimmer featuring the very latest Futronix digital dimming technology. No neutral is required - just normal live supply and live out to the load. This feature makes the P50 ideal for residential use - recommended for replacement of existing light switches or dimmers.
The P50 can dim tungsten or mains halogen lamps or magnetic low voltage with a maximum rating of 600W, and a minimum load of 20W.
Futronix Quality
All Futronix consumer dimmers are built to the same legendary quality standards as our commercial models. Futronix designs and manufactures all of its own products, guaranteeing superior quality, proven reliability and extended life.
|
|
Features
single channel 600W dimmer
infra-red remote control
built-in LED information display and infra-red receiver
master raise and lower
exit delay
sleep timer
variable fade rate from 0.5 seconds to 1 hour (to gradually turn lights on/off)
permanent memory (in the event of a power blackout you don't lose pre-set scenes or need to re-programme your dimmer)
Specifications |
| |
P50 Electrical Specifications
|
Mains supply input voltage : |
|
220-240 Vac
|
Mains supply input
frequency : |
|
50Hz / 60Hz autodetecting
|
Mains supply input current : |
|
3A incoming supply
|
Number of channels : |
|
1
|
Dimming output (max) : |
|
600W per channel (max)
|
Dimming output (min) : |
|
20W minimum load
|
Switching output (max) : |
|
600W per channel (max)
|
Load type : |
|
Tungsten, Mains Halogen, magnetic low
voltage
|
Wall box sizes :
(W,H,D) mm : |
|
Single gang BS standard wallbox
75, 75, 35mm depth |
|